Automatic circuit breaker ETI ETIMAT 6 1P 6A D 6kA (2161512)

ETI ETIMAT 6 is a modular automatic circuit breaker designed to protect electrical circuits against overload and short circuit. With one pole, it is intended for single-phase lines where the phase conductor needs to be disconnected separately. The rated current of 6 A makes it suitable for circuits with low power demand, such as lighting lines and other small consumers in residential or commercial installations. The D tripping characteristic means the device is adapted for circuits with elevated inrush currents. This is important in applications where connected equipment may draw a short-term current surge during startup that exceeds normal operating conditions. The breaking capacity of 6 kA allows the breaker to interrupt fault currents typical for many low-voltage networks, providing circuit protection under short-circuit conditions. The device operates on AC voltage and is rated for 230/400 V, so it can be used in common single-phase and three-phase power systems. The breaker complies with IEC/EN 60898-1 and IEC 60947-2 standards, confirming its suitability for use in distribution boards and other electrical installation systems. Its Uimp rated impulse withstand voltage of 6 kV indicates resistance to brief overvoltage events that may occur in the network. The operating frequency of 50/60 Hz allows use in systems with either common mains standard. Conductor connection is possible for cross-sections from 1 to 25 mm², which simplifies installation and makes the device compatible with a wide range of wiring configurations. As a modular device, ETIMAT 6 is meant for mounting in a distribution board on standard modular equipment rails, where compact size and compliance with electrical installation requirements are important. This breaker is used as a protective element in circuits that require defined current limitation, reliable fault interruption, and compatibility with standard low-voltage distribution architecture.