1901353 Авт. вимикач ETIMAT P10 3p D 32A (10kA)

The ETI ETIMAT P10 circuit breaker is designed to protect electrical circuits against overload and short circuit conditions in distribution boards used in residential, commercial, and industrial installations. Its three-pole design allows simultaneous disconnection of all phases, which is especially important in three-phase systems where coordinated switching is required. With a rated current of 32 A, this device is suitable for lines supplying equipment that operates within this load range. The D tripping characteristic makes the breaker appropriate for circuits with high inrush currents. This is relevant for loads such as motors, transformers, and other equipment that can draw a brief current surge at start-up. In such applications, the device helps maintain circuit protection without unnecessary tripping during normal switching events. The breaking capacity of 10 kA indicates the ability to interrupt high short-circuit currents within the specified limits, which is an important parameter for installations where fault currents may be significant. The breaker is intended for AC networks with a rated voltage of 415 V and a frequency of 50/60 Hz, so it can be used in common three-phase power supply systems. The rated impulse withstand voltage Uimp of 6 kV describes resistance to short-duration overvoltage events and supports operation in electrical installations exposed to transient disturbances. For installation, the device accommodates conductors with a cross-section from 1 to 25 mm², allowing connection with a wide range of suitable wires and cables during panel assembly. Compliance with EN/IEC 60898 confirms that the product belongs to the standard class of modular protection devices intended for fixed installations. Overall, the ETIMAT P10 3P D 32 A provides circuit protection for applications where three-pole isolation, current rating, high breaking capacity, and compatibility with loads featuring elevated starting currents are required.