1901215 Авт. вимикач ETIMAT P10 2p B 50A (10kA)

The ETIMAT P10 series automatic circuit breaker by ETI is intended for protection of electrical circuits against overload and short circuit currents. It is used in distribution boards of residential, commercial, and light industrial facilities where switching and protective disconnection of two-pole AC lines is required. This model is rated at 50 A and features a B tripping characteristic, which makes it suitable for circuits with low inrush currents. The two-pole design allows simultaneous disconnection of both live conductors, which is important where full circuit isolation is needed. The breaker is designed for AC networks with a rated voltage of 415 V and a frequency of 50/60 Hz, so it can be applied in systems matching these electrical conditions. The breaking capacity of 10 kA indicates the ability to safely interrupt high short-circuit currents within its rated category. In addition, the rated impulse withstand voltage Uimp of 6 kV reflects resistance to short-duration overvoltage events in the network. These parameters are important for ensuring proper circuit protection in distribution equipment. For installation and conductor connection, the device supports a nominal wire cross-section range from 1 to 25 mm², which provides compatibility with commonly used cable and wire sizes in electrical assembly work. The AC voltage type confirms that the device is intended specifically for alternating-current circuits. The product complies with EN/IEC 60898, the standard governing circuit breakers for household and similar applications. This makes the breaker suitable for use in standard modular switchboards as part of a circuit protection and distribution system. ETIMAT P10 2P 50A B 10kA is therefore a practical option for protecting feeder and outgoing circuits where two-pole disconnection, a 50 A rating, and a 10 kA breaking capacity are required.