1901207 Авт. вимикач ETIMAT P10 2p B 6A (10kA)

ETIMAT P10 by ETI is a two-pole automatic circuit breaker designed to protect electrical lines against overloads and short circuits in AC networks. With a rated current of 6 A and B tripping characteristic, it is suited for circuits with low inrush currents, such as lighting lines and other similar loads in residential and commercial installations. The 2-pole design allows simultaneous switching of two conductors, providing protection for the relevant circuit section. The breaking capacity of 10 kA ensures interruption of fault current within the declared operating limits, which is important for distribution boards where reliable disconnection under short-circuit conditions is required. The breaker is rated for AC voltage up to 415 V and a frequency of 50/60 Hz, so it can be used in standard power supply systems. Another technical parameter is the rated impulse withstand voltage Uimp of 6 kV, which characterizes the device’s resistance to short-duration overvoltage events. The nominal conductor cross-section is 1–25 mm², which should be considered during installation and wiring in the distribution board. The model complies with EN/IEC 60898, the standard governing miniature circuit breakers for domestic and similar installations. This circuit breaker is intended for use as a protective element in apartment, house, and small commercial electrical circuits where overload and short-circuit protection are needed. Its modular format allows installation in a distribution board together with other standard devices, making it suitable for organizing the protection of individual lines in compact electrical systems.