1901042 Авт. вимикач ETIMAT P10 1p D 1A (10kA)

The ETIMAT P10 series automatic circuit breaker from ETI is designed to protect electrical circuits against overloads and short circuits. It is suitable for use in distribution boards of residential, commercial, and technical facilities where a damaged line must be disconnected selectively without affecting other consumers. With a single-pole design, this device is intended to protect one circuit in AC networks. The unit is rated at 1 A, which makes it suitable for low-power circuits and separate sections of an electrical installation with light load. The D tripping characteristic allows the breaker to tolerate short-term inrush currents of a higher level, so it can be used in circuits where significant starting currents may occur. The breaking capacity of 10 kA enables interruption of high short-circuit currents, which is an important parameter for installations with increased requirements for switching resistance. This circuit breaker operates in AC networks with a rated voltage of 240 V and a frequency of 50/60 Hz. The rated impulse withstand voltage, Uimp, is 6 kV, indicating resistance to temporary overvoltages typical for low-voltage installations. The conductor connection range of 1 to 25 mm² makes the device convenient for integration into different wiring schemes and simplifies installation in modular assemblies. The product complies with EN/IEC 60898, the standard that defines the requirements for circuit breakers used in domestic and similar installations. This makes the device appropriate for modular distribution equipment and for local protection of individual electrical lines where compact dimensions, technical compliance, and precise tripping performance are required.