1901202 Авт. вимикач ETIMAT P10 2p B 1A (10kA)

The ETIMAT P10 series from ETI is used to protect electrical circuits against overloads and short circuits. It is intended for installation in distribution boards of residential, commercial, and small industrial facilities where reliable protection and switching of AC lines are required. The device is suitable for single-phase and two-pole circuits, making it applicable in various low-power distribution schemes. This model has 2 poles and a rated current of 1 A. The B tripping characteristic means the circuit breaker is designed for circuits with low inrush currents and provides prompt disconnection when an abnormal condition occurs. With a breaking capacity of 10 kA, it can interrupt high short-circuit currents, which is an important parameter for networks with increased protection requirements. The AC voltage rating is 415 V, while the rated impulse withstand voltage Uimp is 6 kV, indicating resistance to short-duration overvoltage events. The operating frequency is 50/60 Hz, so the device is compatible with common power supply systems. According to the manufacturer’s data, the circuit breaker accepts conductors with a cross-section from 1 to 25 mm². This gives flexibility during installation in switchgear and allows the device to be used in different power distribution arrangements. Compliance with EN/IEC 60898 confirms that the product meets the requirements for miniature circuit breakers used in household and similar installations. ETIMAT P10 is a practical choice for protecting individual electrical lines where precise operating characteristics, sufficient breaking capacity, and standard compliance are important. The combination of 2-pole design, 1 A rated current, B curve, and 10 kA breaking capacity makes this breaker suitable for circuits with low load and for applications requiring simultaneous disconnection of two conductors.