1901307 Авт. вимикач ETIMAT P10 3p B 6A (10kA)

This ETI device from the ETIMAT P10 series is designed for protection of electrical circuits against overload and short circuit in AC three-phase networks. With three poles, it is suitable for switching and protecting lines where all phases must be disconnected simultaneously. The rated current of 6 A makes it appropriate for circuits with relatively low load, while the B tripping characteristic provides operation under small overloads and short-duration inrush currents. For this reason, it is commonly used in lighting circuits and other networks with predominantly resistive loads. The breaking capacity of 10 kA indicates the ability to safely interrupt short-circuit currents at the specified network level. This parameter is important in distribution boards where fault currents can rise sharply during a short circuit. The device is rated for 415 V AC and has a rated impulse withstand voltage Uimp of 6 kV, which supports operation in electrical installations exposed to transient overvoltages. The operating frequency range of 50/60 Hz allows use in systems with standard mains frequency. For conductor connection, the breaker supports a nominal cross-section range of 1–25 mm², giving flexibility in internal wiring and compatibility with different cable sizes used in distribution circuits. Compliance with EN/IEC 60898 confirms that this is a modular circuit breaker intended for household and similar installations. Such compliance is relevant when selecting protection devices for residential, commercial, and administrative facilities. ETIMAT P10 combines a three-pole configuration, B curve, 6 A rating, and 10 kA breaking capacity in a format suitable for mounting in distribution panels. It is used where circuit protection, phase disconnection, and standardized modular installation are required in three-phase AC systems.