ETI ETIMAT P10 1-pole 16A D circuit breaker 10kA (1901050)

ETIMAT P10 by ETI is a single-pole automatic circuit breaker designed to protect electrical lines against overloads and short circuits in AC networks. It is used in distribution boards of residential, commercial, and small industrial installations where reliable disconnection of an individual load group is required during fault conditions. With one pole, the device is intended for protection of single-phase circuits. The rated current is 16 A, which makes this breaker suitable for circuits with moderate load. The D tripping characteristic allows short-time inrush currents of a higher level, so the device can be applied in circuits with equipment that has a pronounced starting current. The breaking capacity of 10 kA enables interruption of the circuit under high short-circuit currents, which is important in installations with increased fault-current levels. The breaker is designed for operation in AC networks with a rated voltage of 240 V and a frequency of 50/60 Hz. The rated impulse withstand voltage Uimp is 6 kV, indicating resistance to short-duration voltage surges. This parameter is relevant for systems where transient overvoltages may occur and where the protection device must maintain its electrical integrity. Connection of conductors is supported for cross-sections from 1 mm² to 25 mm², which simplifies integration into standard electrical wiring schemes. The product complies with EN/IEC 60898, the standard governing circuit breakers for household and similar fixed installations. This confirms its intended use in final circuit protection and in distribution systems where stable tripping characteristics and compliance with electrical installation requirements are essential.