1901036 Авт. вимикач ETIMAT P10 1p C 63A (10kA)

The ETI ETIMAT P10 circuit breaker is designed to protect electrical circuits against overload and short circuit in residential and similar installations. With a single-pole design, it is used for switching and protecting one line in compact modular distribution boards. The rated current of 63 A makes this device suitable for circuits with elevated load, while the C tripping characteristic provides proper operation in circuits with moderate inrush currents. This makes the breaker appropriate for lines supplying equipment that can draw brief current surges during startup. The breaking capacity of 10 kA allows the device to operate in networks where high short-circuit currents may occur, helping to maintain circuit protection within the declared electrical limits. The breaker is intended for AC systems with a rated operating voltage of 240 V and a frequency of 50/60 Hz. The rated impulse withstand voltage Uimp of 6 kV indicates resistance to impulse overvoltages within the specified parameters. The device is installed in a distribution board as a standard modular component. It supports conductor cross-sections from 1 to 25 mm², which provides compatibility with a wide range of wiring sizes within the stated technical range. Compliance with EN/IEC 60898 confirms that the product meets the requirements applicable to circuit breakers used for the protection of household and similar electrical installations. ETIMAT P10 1P C 63A 10 kA is used in apartments, private houses, offices, and other facilities where it is necessary to protect a separate electrical branch according to defined technical parameters. Its combination of single-pole construction, 63 A nominal current, C curve, and 10 kA breaking capacity makes it suitable for circuit protection in modular low-voltage distribution systems.