1901052 Авт. вимикач ETIMAT P10 1p D 25A (10kA)

This ETIMAT P10 automatic circuit breaker from ETI is designed to protect electrical circuits against overload and short circuit in single-phase AC networks. It is used in distribution boards of residential, commercial, and small industrial installations where one line needs individual switching and consistent protection during operation. The device has 1 pole, a rated current of 25 A, and a D tripping characteristic. This means it is intended for circuits with higher inrush currents, such as loads that draw a short-term surge above their normal operating current. The 10 kA breaking capacity allows the breaker to disconnect fault current in networks with a higher potential short-circuit level, which is an important parameter for safe circuit protection in demanding electrical systems. Additional electrical characteristics include a rated impulse withstand voltage Uimp of 6 kV, which improves resistance to transient overvoltages. The breaker is intended for AC voltage systems with a rated voltage of 240 V and operates at 50/60 Hz, making it suitable for common household and many commercial power supply conditions. The conductor cross-section range is 1–25 mm², which provides flexibility when connecting wires within the specified limits and simplifies integration into different distribution schemes. The product complies with EN/IEC 60898, the standard for modular automatic circuit breakers used for protecting electrical circuits. This confirms that the device is designed for typical low-voltage installation practices and can be applied to lighting circuits, power groups, and equipment circuits where single-pole protection, 25 A current rating, D curve characteristics, and 10 kA breaking capacity are required.