Circuit breaker ETI ETIMAT P10 1P 6A C 10kA (1901027)

ETI ETIMAT P10 is an automatic circuit breaker intended for protecting electrical circuits against overload and short circuit in AC networks. With one pole, it is suitable for installation in distribution boards used in residential, administrative, and small commercial facilities, where separate protection of lighting lines or socket groups is required. The device is rated for a current of 6 A and uses a C tripping characteristic. This tripping curve is applied in circuits with short-term inrush currents, for example when switching on luminaires with electronic components, small motors, and other equipment with moderate starting loads. Such behavior helps the breaker respond appropriately to fault conditions while avoiding unnecessary tripping during normal start-up currents. The breaking capacity of 10 kA provides the ability to interrupt circuits under high short-circuit currents, which is an important parameter for low-voltage protection systems. The breaker is designed for operation at an AC rated voltage of 240 V and a frequency of 50/60 Hz. Its rated impulse withstand voltage Uimp is 6 kV, indicating resistance to short-duration voltage surges that may occur in the electrical network. ETIMAT P10 complies with EN/IEC 60898, the standard governing circuit breakers for household and similar installations. This confirms its intended use in typical low-voltage applications and in electrical panels where standardized modular equipment is installed. Another practical feature is the permitted conductor cross-section range from 1 to 25 mm². This makes installation more flexible and allows the breaker to be integrated into various types of switchboard assemblies. Overall, the single-pole format, 6 A rating, C characteristic, 10 kA breaking capacity, and standard electrical parameters make this model suitable as a protective device for individual lines in modern distribution systems.