Circuit breaker ETI ETIMAT P10 1P 50A C 10kA (1901035)

ETIMAT P10 by ETI is a single-pole circuit breaker intended for protection of electrical circuits against overload and short circuit in domestic and similar installations. With a rated current of 50 A, it is suitable for circuits with higher load demand, while the C tripping characteristic allows proper operation in lines where moderate inrush currents may occur, such as circuits feeding appliances with inductive loads. The breaking capacity of 10 kA defines the device’s ability to interrupt high fault currents during a short circuit, which is an important parameter for protecting both the installation and connected equipment. The breaker is designed for AC circuits with a rated voltage of 240 V and a nominal frequency of 50/60 Hz. It also has a rated impulse withstand voltage Uimp of 6 kV, which indicates resistance to short-term voltage surges in the network. This model complies with EN/IEC 60898, the standard that sets requirements for circuit breakers used in household and similar electrical installations. It supports conductor cross-sections from 1 to 25 mm², which facilitates integration into distribution boards and allows use with different cable sizes within the specified range. The modular design makes it suitable for installation on a DIN rail in switchboards, where it can serve as protection for a separate line or a group of consumers. ETIMAT P10 1P C50 is used in residential, commercial, and auxiliary electrical networks where protection of a single circuit, operation in AC systems, and interruption of short-circuit currents up to 10 kA are required.