ETI SSQ 163 load changeover switch 1-0-2 1P 63A (2421416)

ETI SSQ 163 load changeover switch 1-0-2 1P 63A (2421416)
ETI SSQ 163 load changeover switch 1-0-2 1P 63A (2421416)
Characteristics

Категорія

SSQ  163

Призначення

Перемикач трипозиційний

Номінальний струм (A)

63A

Номінальна напруга AC (В)

230V

Кількість полюсів

1

Ступінь захисту IP

IP20

Перетин підключаємих провідників, mm2

50mm²

Номінальна частота (Hz)

50Hz/60Hz

ETI

Code: 2421416_ETI

ETI SSQ 163 manual load switch 1-0-2, 1 pole, 63A

SSQ 163 is a manual load changeover switch for switching electrical circuits between positions 1-0-2. It has 1 pole, a rated current of 63A, and belongs to the ETI SSQ series.

per pcs.

982.80 ₴

In Stock

Delivery time 1-2 days

Quick order
Delivery

Delivery across Ukraine within 5 days from the purchase date.

Payment

Pay for orders via Liqpay and plata by mono services.

Guarantee

100% certified products. Service and support.

About product

ETI SSQ 163 is a manual load changeover switch designed for switching electrical circuits between three positions: 1-0-2. This operating logic makes it suitable for selecting one of two power sources or for disconnecting a line to the neutral position, which is useful in distribution boards, control assemblies, and other low-voltage installations where direct manual switching is required instead of automatic control. The device has 1 pole and is rated for a nominal current of 63 A at 230 V AC. Such parameters make it applicable in single-phase circuits where reliable changeover between sources or operating modes is needed. The AC-22B utilization category indicates suitability for switching mixed resistive and inductive loads, which is typical for many residential and commercial electrical systems. The switch operates at 50/60 Hz, so it can be used in networks with the most common supply frequencies. Connection of conductors with a cross-section up to 50 mm² provides compatibility with power circuits that require larger conductor sizes and secure current-carrying connections. Compliance with IEC 60947-3 confirms that the device belongs to low-voltage switching and disconnection equipment and is intended for operation under standardized electrical conditions. The IP20 ingress protection rating means the switch is protected against contact with hazardous live parts and is intended for installation inside enclosed electrical panels or similar dry indoor environments. The SSQ 163 series designation helps identify the product within ETI’s switching device range and supports selection for projects where a three-position manual load changeover function is required. Overall, this 1-0-2 switch is a functional solution for manual source selection, line disconnection, and simple load routing in single-phase systems. Its 63 A rating, 1-pole construction, AC-22B category, and support for conductors up to 50 mm² define its use in compact but power-oriented electrical assemblies.
Головна

Категорія

SSQ  163

Призначення

Перемикач трипозиційний

Номінальний струм (A)

63A

Номінальна напруга AC (В)

230V

Кількість полюсів

1

Ступінь захисту IP

IP20

Перетин підключаємих провідників, mm2

50mm²

Номінальна частота (Hz)

50Hz/60Hz

Стандарт

60947-3

Підгрупа

Перемикач 1-0-2

-

0 reviews

No reviews for this product yet. Be the first!

Recently Viewed

ETI SSQ 340 load switch 3P 40A 1-0-2 (2421435)
ETI SSQ 340 load switch 3P 40A 1-0-2 (2421435)

ETI SSQ 340 is a three-position load switch designed for manual switching of electrical circuits in the 1-0-2 configuration. It is used in distributio...

ETI EFI-4 residual current device 80/0.3 A type A 10kA (2064545)
ETI EFI-4 residual current device 80/0.3 A type A 10kA (2064545)

ETI EFI-4 is a residual current device designed to protect electrical circuits against leakage currents and reduce the risk of electric shock in resid...

ETI KZS-1M UNI differential circuit breaker C 25A/0.01A type A 6kA universal connection (2176016)
ETI KZS-1M UNI differential circuit breaker C 25A/0.01A type A 6kA universal connection (2176016)

ETI KZS-1M UNI is a differential circuit breaker intended for protection of electrical circuits against overload, short circuit, and residual current...

ETI KZS-1M UNI differential circuit breaker C 10A 0.01A type AC 6kA (2176112)
ETI KZS-1M UNI differential circuit breaker C 10A 0.01A type AC 6kA (2176112)

The ETI KZS-1M UNI differential circuit breaker is designed for combined protection of electrical lines against overload, short circuit, and leakage c...

ETI SSQ 225 load break switch 2P 25A 1-0-2 (2421424)
ETI SSQ 225 load break switch 2P 25A 1-0-2 (2421424)

The ETI SSQ 225 load break switch is designed for manual switching of electrical circuits in a three-position 1-0-2 configuration. This operating sche...

ETI SSQ 240 load break switch 1-0-2, 2P 40A (2421425)
ETI SSQ 240 load break switch 1-0-2, 2P 40A (2421425)

ETI SSQ 240 is a three-position load break switch designed for manual switching of electrical circuits in the 1-0-2 positions. It is used in distribut...

2062532 Реле диференційне (ПЗВ) EFI-2 100/0,1 тип A (10kA)
2062532 Реле диференційне (ПЗВ) EFI-2 100/0,1 тип A (10kA)

ETI EFI-2 is a residual current device intended for protection of electrical circuits against leakage currents in residential and commercial distribut...

ETI KZS-1M UNI differential circuit breaker B 25A/0.03A type AC 6kA (universal connection) (2176126)
ETI KZS-1M UNI differential circuit breaker B 25A/0.03A type AC 6kA (universal connection) (2176126)

ETI KZS-1M UNI differential circuit breaker is designed to provide combined protection of electrical circuits against overload, short circuit, and res...

ETI SSQ 380 load changeover switch 3P 80A 1-0-2 (2421437)
ETI SSQ 380 load changeover switch 3P 80A 1-0-2 (2421437)

The ETI SSQ 380 is a three-position load changeover switch designed for manual switching of electrical circuits between two operating lines through a...

ETI SSQ 425 load changeover switch 4P 25A 1-0-2 (2421444)
ETI SSQ 425 load changeover switch 4P 25A 1-0-2 (2421444)

This ETI SSQ 425 load changeover switch is intended for manual switching of electrical circuits in positions 1-0-2. Such operation makes it possible t...