Circuit breaker ETI ETIMAT 6 1P+N 32A C 1 module (2191127)

ETIMAT 6 from ETI is an automatic circuit breaker intended for protecting electrical circuits against overloads and short circuits in residential and similar electrical installations. The 1P+N configuration makes it suitable for single-phase lines where both the phase conductor and the neutral conductor are used in the circuit structure. With a compact 1-module width, the device can be installed in distribution boards where space optimization is important, and it is commonly used for individual lighting circuits, socket groups, and other single-phase loads. The rated current is 32 A, which places this breaker in the range for circuits with a higher load within the specified current limit. The C tripping characteristic indicates that the device is designed for circuits with moderate inrush currents, such as loads that briefly draw more current during start-up than during normal operation. This makes it appropriate for many household and small commercial applications where such current peaks can occur. The breaking capacity of 6 kA defines the breaker’s ability to disconnect the circuit under short-circuit conditions up to this value. The breaker is designed for AC operation at a nominal voltage of 230 V and a frequency of 50/60 Hz. Its nominal impulse withstand voltage Uimp is 4 kV, which is an important parameter for assessing resistance to short-duration voltage surges in the network. The permissible conductor cross-section ranges from 1 to 10 mm², allowing connection of conductors within this range according to installation requirements. This model complies with IEC/EN 60898-1, the standard that sets requirements for circuit breakers used in domestic and similar applications. The combination of 1P+N pole arrangement, 32 A rating, C characteristic, 6 kA breaking capacity, AC voltage type, and 1-module format makes it a practical solution for protecting separate lines in apartment, private house, and commercial distribution boards.