ETI ETIMAT 6 circuit breaker 1P+N 16A C 1 module (2191124)

The ETIMAT 6 circuit breaker from ETI is intended for protection and switching of electrical lines against overload and short circuit. It is used in distribution boards of residential, commercial, and small industrial installations where a single-phase circuit with neutral conductor must be protected. The 1P+N configuration means the device is designed for one phase pole together with the neutral conductor, which is a common solution in 230 V networks. With a rated current of 16 A, this breaker is suitable for protecting lighting circuits, socket outlets, and other loads with moderate power demand. The C tripping characteristic allows operation in circuits with short-term inrush currents, such as equipment with electric motors or other inductive loads. The breaking capacity of 6 kA provides disconnection of short-circuit currents within the range typical for standard low-voltage installations. The device is designed for AC circuits with a rated voltage of 230 V and a frequency of 50/60 Hz. The rated impulse withstand voltage Uimp of 4 kV indicates resistance to short-duration surge voltages in the network. The permissible conductor cross-section of 1–10 mm² ensures compatibility with commonly used installation wires and cables, which simplifies connection during panel assembly and wiring work. This modular device occupies 1 module, which helps optimize space on a DIN rail and makes it easier to arrange protective and switching equipment in the distribution board. Compliance with IEC/EN 60898-1 confirms that the product is made according to the standard for circuit breakers used in household and similar installations. In practice, this makes the breaker appropriate for creating compact and well-organized protection of individual lines in electrical systems where a combination of rated current, tripping curve, and short-circuit capacity must be matched to the load.