2191107 Авт. вимикач ETIMAT 6 1p+N (1мод.) B 32А

The ETIMAT 6 automatic circuit breaker from ETI is designed to protect electrical lines against overloads and short circuits in residential and commercial distribution networks. The 1P+N configuration allows simultaneous switching of the phase conductor and neutral, which is practical for single-phase groups where a compact modular solution is required. With a rated current of 32 A and B tripping characteristic, this device is suitable for circuits with moderate inrush currents, including lighting and general socket lines. The rated breaking capacity of 6 kA ensures circuit interruption under significant short-circuit currents in AC networks. The breaker is intended for AC operation at a rated voltage of 230 V and a frequency of 50/60 Hz, matching common low-voltage electrical systems. The rated impulse withstand voltage Uimp is 4 kV, which is an important parameter for electrical protection in environments where transient overvoltages may occur. This circuit breaker complies with IEC/EN 60898-1, the standard governing protective devices for household and similar installations. The permissible conductor cross-section is 1–10 mm², allowing connection to compatible cable lines within the specified range. Such a parameter set makes the device appropriate for use in distribution boards and electrical panels where standardization of components and safe circuit protection are required. The modular design occupies 1 module on a DIN rail, helping to save installation space in compact switchboards. This is especially useful when several protective devices need to be placed in a limited enclosure. The ETIMAT 6 series is commonly used for protecting individual consumer groups when a combination of compact dimensions, standard modular mounting, and specified protective characteristics is needed for typical 230 V networks.