2191101 Авт. вимикач ETIMAT 6 1p+N (1мод.) B 6А

The ETIMAT 6 miniature circuit breaker from ETI is intended for protection of electrical circuits against overload and short circuit conditions. It is typically installed in distribution boards of residential, administrative, and small commercial facilities where single-phase lines require reliable circuit protection. The 1P+N configuration provides switching of the phase conductor with the neutral conductor passing through the device, which is practical for AC networks and helps organize the wiring of single-phase circuits more clearly. This model has a rated current of 6 A, so it is suitable for circuits with low power demand, especially lighting and other standard household loads without significant inrush current. The B tripping curve makes the device appropriate for lines with relatively small starting currents, which is important for conventional indoor circuits. With a breaking capacity of 6 kA, the breaker is able to interrupt fault currents typical for many residential and light commercial installations. The device is designed for 230 V AC operation at a rated frequency of 50/60 Hz, matching common single-phase supply conditions. The rated impulse withstand voltage Uimp of 4 kV indicates resistance to short-term overvoltages that may occur in the electrical system. The terminal range of 1 to 10 mm² allows connection of conductors used in common panel assembly and installation tasks. The breaker complies with IEC/EN 60898-1, which confirms its suitability for use in standard low-voltage modular distribution systems. Its compact 1-module format is especially useful where space in the distribution board is limited and a neat arrangement of protective devices is required. Thanks to these parameters, the ETIMAT 6 can be used as a basic protective element for final circuits in modern electrical distribution panels.