ETI KZS-4M differential breaker 3P+N C 6/0,03 Type A 6kA
This differential circuit breaker is designed for combined protection of electrical circuits against overload, short circuit, and leakage current. It...
Категорія
Диференційний автоматичний вимикач
Номінальний струм (A)
6A
Тип
A
Номінальний струм витоку (A)
0.03A
Характеристика спрацювання
C
Кількість полюсів
3+N
Вимикаюча здатність (кА)
6kA
Номінальна частота (Hz)
50Hz/60Hz
Code: 2174921
Differential circuit breaker KZS-4M protects electrical lines against overload, short circuit, and leakage current. It has a 3P+N configuration, C tripping characteristic, rated 6/0,03, Type A, and a breaking capacity of 6kA.
4,368.00 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
This differential circuit breaker is designed for combined protection of electrical circuits against overload, short circuit, and leakage current. It is used in distribution boards of residential, commercial, and small industrial installations where the functions of an automatic circuit breaker and a residual current protective device need to be integrated in one module. The 3P+N configuration makes it suitable for three-phase networks with a neutral conductor, which is common in many power distribution systems.
The device is rated at 6 A nominal current and 0.03 A residual operating current, providing protection for circuits with low operating loads while maintaining sensitive leakage-current detection. The C tripping characteristic indicates suitability for circuits with moderate inrush currents, for example where brief current peaks may occur during equipment start-up. The 6 kA breaking capacity allows the device to interrupt fault currents typical of standard electrical installations, helping to disconnect the circuit in the event of a short circuit.
Type A operation means the breaker responds not only to alternating residual current, but also to pulsating direct residual current. This is important for circuits supplying electronic loads, household appliances, and equipment with power electronics. The rated frequency of 50/60 Hz makes the device compatible with commonly used AC power systems.
The breaker is intended for installation in a standard modular distribution board. It supports conductor cross-sections from 1 mm² to 25 mm², which simplifies its use in different wiring layouts and distribution schemes. Compliance with IEC/EN 61009 confirms that the device meets the requirements applicable to differential circuit breakers. ETI KZS-4M is a practical solution for installations where overload protection, short-circuit protection, and leakage-current protection are required in a single device.
Категорія
Диференційний автоматичний вимикач
Номінальний струм (A)
6A
Тип
A
Номінальний струм витоку (A)
0.03A
Характеристика спрацювання
C
Кількість полюсів
3+N
Вимикаюча здатність (кА)
6kA
Номінальна частота (Hz)
50Hz/60Hz
Номінальний перетин
1mm²-25mm²
Стандарт
IEC/EN 61009
0 reviews
No reviews for this product yet. Be the first!