2146519 Авт. вимикач ETIMAT 6 3p+N C 32А (6 kA)
The ETI ETIMAT 6 automatic circuit breaker is designed to protect electrical circuits against overload and short circuit in AC networks. It is suitabl...
Категорія
Диференційний автоматичний вимикач
Номінальний струм (A)
32A
Тип
A
Номінальний струм витоку (A)
0.1A
Характеристика спрацювання
C
Кількість полюсів
3+N
Вимикаюча здатність (кА)
6kA
Номінальна частота (Hz)
50Hz/60Hz
Code: 2174427
The KZS-4M differential circuit breaker protects electrical circuits against overload, short circuit, and leakage current. It is rated at 3P+N, 32A, with C tripping characteristic, Type A residual current sensitivity, and 6kA breaking capacity.
4,509.27 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
The ETI KZS-4M differential circuit breaker is designed to protect three-phase electrical circuits with a neutral conductor against overload, short circuit, and leakage current. It combines the functions of an automatic circuit breaker and a residual current device in a single housing, which makes it suitable for distribution boards in residential, commercial, and other low-voltage installations where both overcurrent and earth-leakage protection are required.
This model has a 3P+N pole configuration, providing switching of three phases and the neutral conductor. The rated current is 32 A, so the device is intended for circuits with a corresponding load level. The C tripping characteristic is used for lines with moderate inrush currents, such as circuits supplying equipment that may draw a short-term current increase during start-up. The residual current rating of 0.1 A enables disconnection when leakage current appears and adds an additional level of electrical safety for the protected circuit.
The breaking capacity of 6 kA indicates the device’s ability to interrupt a circuit under short-circuit conditions up to the declared value. This parameter is important for both domestic and commercial installations, where the protective device must operate reliably under fault conditions. The breaker is rated for operation at 50/60 Hz, which allows use in systems with either standard mains frequency.
Connection is provided for conductors with a cross-section from 1 mm² to 25 mm², which gives flexibility when integrating the device into switchboard wiring. The product complies with IEC/EN 61009, the standard governing differential circuit breakers and their technical requirements. With its 3P+N configuration, 32 A rated current, Type A residual current sensitivity, C tripping characteristic, and 6 kA breaking capacity, this ETI device is a practical solution for protecting three-phase distribution lines in modern electrical networks.
Категорія
Диференційний автоматичний вимикач
Номінальний струм (A)
32A
Тип
A
Номінальний струм витоку (A)
0.1A
Характеристика спрацювання
C
Кількість полюсів
3+N
Вимикаюча здатність (кА)
6kA
Номінальна частота (Hz)
50Hz/60Hz
Номінальний перетин
1mm²-25mm²
Стандарт
IEC/EN 61009
0 reviews
No reviews for this product yet. Be the first!