Catalog HOUSEHOLD AND COMMERCIAL EQUIPMENT Modular protective and switching equipment Differential breakers ETI KZS-4M 3P+N 20A C type AC residual current circuit breaker 6kA

ETI KZS-4M 3P+N 20A C type AC residual current circuit breaker 6kA

ETI KZS-4M 3P+N 20A C type AC residual current circuit breaker 6kA
ETI KZS-4M 3P+N 20A C type AC residual current circuit breaker 6kA
Characteristics

Категорія

Диференційний автоматичний вимикач

Номінальний струм (A)

20A

Тип

AC

Номінальний струм витоку (A)

0.03A

Характеристика спрацювання

C

Кількість полюсів

3+N

Вимикаюча здатність (кА)

6kA

Номінальна частота (Hz)

50Hz/60Hz

ETI

Code: 2174025

ETI KZS-4M 3P+N 20A C type AC residual current circuit breaker 6kA

The KZS-4M differential circuit breaker protects electrical circuits against overload, short circuit, and leakage current. It is rated at 3P+N, 20A, with C tripping characteristic, 30 mA sensitivity, AC type, and 6kA breaking capacity.

per pcs.

3,577.77 ₴

On Order

Quick order
Delivery

Delivery across Ukraine within 5 days from the purchase date.

Payment

Pay for orders via Liqpay and plata by mono services.

Guarantee

100% certified products. Service and support.

About product

The ETI KZS-4M differential circuit breaker is designed to protect electrical circuits against overload, short circuit, and leakage current. It is used in distribution boards in residential, commercial, and small industrial installations where one device must provide both overcurrent protection and differential-current monitoring. With a 3P+N pole configuration, this model is suitable for three-phase networks with a neutral conductor, making it applicable for protecting grouped loads and separate outgoing lines.

The rated current of 20 A makes the device appropriate for circuits with moderate load. The C tripping characteristic allows it to tolerate short inrush currents that can occur when starting equipment with motors or other inductive loads, reducing the risk of nuisance tripping. The rated residual current of 0.03 A, or 30 mA, is intended to improve personal protection and to limit the consequences of current leakage caused by insulation faults or contact of a live conductor with conductive parts. Type AC indicates operation with alternating differential current, which corresponds to typical standard AC circuits.

A breaking capacity of 6 kA means the device can disconnect a circuit under significant short-circuit conditions within the limits commonly found in household and commercial power systems. The nominal frequency range of 50/60 Hz provides compatibility with both 50 Hz and 60 Hz mains systems. The conductor cross-section range from 1 mm² to 25 mm² supports a wide variety of wiring arrangements and simplifies integration into different electrical designs.

The device complies with IEC/EN 61009, the standard for differential circuit breakers, confirming that it is intended for use as a combined protective device in modular switchboard assemblies. Overall, the KZS-4M is a practical solution for protecting lighting circuits, socket circuits, and other branch circuits where both overcurrent protection and residual-current protection are required in a single unit.

Головна

Категорія

Диференційний автоматичний вимикач

Номінальний струм (A)

20A

Тип

AC

Номінальний струм витоку (A)

0.03A

Характеристика спрацювання

C

Кількість полюсів

3+N

Вимикаюча здатність (кА)

6kA

Номінальна частота (Hz)

50Hz/60Hz

Номінальний перетин

1mm²-25mm²

Стандарт

IEC/EN 61009

-

0 reviews

No reviews for this product yet. Be the first!

Recently Viewed