ETI KZS-2M RCBO 2P 25/0.3A Type A 10kA

ETI KZS-2M RCBO 2P 25/0.3A Type A 10kA
ETI KZS-2M RCBO 2P 25/0.3A Type A 10kA
Characteristics

Категорія

Диференційний автоматичний вимикач

Номінальний струм (A)

25A

Тип

A

Номінальний струм витоку (A)

0.3A

Характеристика спрацювання

C

Кількість полюсів

1+N

Вимикаюча здатність (кА)

10kA

Номінальна частота (Hz)

50Hz/60Hz

ETI

Code: 2173426

ETI KZS-2M RCBO 2P 25/0.3A Type A 10kA

The KZS-2M differential automatic circuit breaker protects electrical circuits against overload, short circuit, and leakage current. It has 2 poles, rated current 25/0.3, C tripping characteristic, Type A, and breaking capacity 10kA.

per pcs.

1,896.96 ₴

On Order

Quick order
Delivery

Delivery across Ukraine within 5 days from the purchase date.

Payment

Pay for orders via Liqpay and plata by mono services.

Guarantee

100% certified products. Service and support.

About product

ETI KZS-2M is a differential circuit breaker designed to protect electrical circuits against overload, short circuit, and leakage current to earth. It combines overcurrent protection and residual current protection in one modular device, which makes it suitable for use in residential, administrative, and small commercial installations where compact and functional circuit protection is required.

The device is rated at 25 A and uses C tripping characteristic, so it can be applied in circuits with moderate inrush currents. This makes it appropriate for typical single-phase loads such as lighting lines, socket circuits, and selected appliances with electronic or motor-driven components. The rated residual current of 0.3 A indicates the level of leakage-current protection provided by the unit. The 1+N pole configuration means that the phase conductor and neutral are switched together, which is a common solution for single-phase networks with neutral conductor.

With a breaking capacity of 10 kA, the device can be used in networks where higher short-circuit currents may occur. Type A protection means that it responds not only to sinusoidal alternating residual currents but also to pulsating direct residual currents, which is relevant for many modern household and office loads containing electronic circuits. The rated frequency of 50/60 Hz allows operation in systems using either of these standard supply frequencies.

The unit is intended for installation in a distribution board as a modular device. It supports conductor cross-sections from 1 mm² to 25 mm², which simplifies integration into common electrical wiring schemes. Compliance with IEC/EN 61009 confirms that the product meets the standard requirements for differential circuit breakers.

ETI KZS-2M is a practical solution for combining circuit protection functions in a single device, helping organize the distribution of power in single-phase electrical lines while maintaining the required level of protection for connected loads.

Головна

Категорія

Диференційний автоматичний вимикач

Номінальний струм (A)

25A

Тип

A

Номінальний струм витоку (A)

0.3A

Характеристика спрацювання

C

Кількість полюсів

1+N

Вимикаюча здатність (кА)

10kA

Номінальна частота (Hz)

50Hz/60Hz

Номінальний перетин

1mm²-25mm²

Стандарт

IEC/EN 61009

-

0 reviews

No reviews for this product yet. Be the first!

Recently Viewed