ETI KZS-2M 2-pole differential breaker 32A, B curve, type AC, 10kA
ETI KZS-2M is a differential circuit breaker designed for protecting electrical circuits against overload, short circuit, and leakage current. It is i...
Категорія
Диференційний автоматичний вимикач
Номінальний струм (A)
20A
Тип
AC
Номінальний струм витоку (A)
0.03A
Характеристика спрацювання
C
Кількість полюсів
1+N
Вимикаюча здатність (кА)
10kA
Номінальна частота (Hz)
50Hz/60Hz
Code: 2173125
The KZS-2M differential automatic circuit breaker protects electrical circuits against overload, short circuit, and residual current. It has 2 poles, a rated current of 20A, residual current setting of 0.03A, C tripping characteristic, AC type, and a breaking capacity of 10kA.
1,572.48 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
The ETI KZS-2M differential automatic circuit breaker is designed to protect electrical circuits against overload, short circuit, and residual current. It is used in distribution boards for residential, commercial, and general-purpose electrical installations where combined protection in one device is required. By integrating the functions of an automatic circuit breaker and a residual current device, it helps simplify panel layout and reduce the number of separate modules needed for line protection.
This model is rated at 20 A and has a C tripping characteristic, which makes it suitable for circuits with moderate inrush currents. The 1+N pole configuration provides switching of the phase conductor together with the neutral, which is important for single-phase branch circuits and for ensuring proper disconnection of both conductors. The residual current rating is 0.03 A, or 30 mA, so the device responds to dangerous leakage currents that may appear due to insulation failure or accidental contact between live parts and the equipment enclosure.
The breaking capacity of 10 kA allows the device to be used in installations where high short-circuit currents may occur. It operates at a nominal frequency of 50/60 Hz, so it is suitable for standard AC networks. The permissible conductor cross-section is 1 to 25 mm², which should be taken into account during planning and terminal connection. These parameters make the device applicable to lighting groups, socket circuits, and other single-phase loads requiring coordinated protection.
The product complies with IEC/EN 61009, the standard governing differential automatic circuit breakers. Type AC indicates suitability for circuits with sinusoidal alternating residual current. This specification should be considered when selecting protection for the relevant type of electrical load and network conditions.
Категорія
Диференційний автоматичний вимикач
Номінальний струм (A)
20A
Тип
AC
Номінальний струм витоку (A)
0.03A
Характеристика спрацювання
C
Кількість полюсів
1+N
Вимикаюча здатність (кА)
10kA
Номінальна частота (Hz)
50Hz/60Hz
Номінальний перетин
1mm²-25mm²
Стандарт
IEC/EN 61009
0 reviews
No reviews for this product yet. Be the first!