ETI KZS-2M residual current circuit breaker with overcurrent protection C 10 A 0.03 A AC 10 kA
The ETI KZS-2M differential circuit breaker is designed for combined protection of electrical circuits against overload, short circuit, and residual c...
Категорія
Диференційний автоматичний вимикач
Номінальний струм (A)
10A
Тип
AC
Номінальний струм витоку (A)
0.03A
Характеристика спрацювання
C
Кількість полюсів
1+N
Вимикаюча здатність (кА)
10kA
Номінальна частота (Hz)
50Hz/60Hz
Code: 2173122
Used to protect electrical circuits against overload, short circuit and leakage current. The KZS-2M has 2 poles, rated current 10 A, residual current setting 0.03 A, tripping characteristic C, type AC and breaking capacity 10 kA.
1,618.41 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
The ETI KZS-2M differential circuit breaker is designed for combined protection of electrical circuits against overload, short circuit, and residual current leakage. It is used in distribution boards of residential, commercial, and small industrial installations where both overcurrent protection and earth-leakage protection are required in a single device. Such a solution is especially practical for single-phase outgoing lines, lighting circuits, and socket circuits.
This model has a rated current of 10 A and a C tripping characteristic. The C curve is suitable for circuits with moderate inrush currents, which makes the device appropriate for many everyday consumer loads. The rated residual current is 0.03 A, or 30 mA, so the device responds to dangerous leakage currents and helps improve electrical safety for people and property. The AC type indicates operation with alternating residual current. The breaking capacity of 10 kA allows the device to be applied in networks where high short-circuit currents may occur.
The device is built in a 1+N pole configuration, meaning it is intended for phase and neutral conductors. This arrangement is convenient for protecting single-phase circuits, since it provides control of both conductors within one compact module arrangement. The breaker is designed for operation at a nominal frequency of 50/60 Hz and supports conductor cross-sections from 1 to 25 mm², which simplifies integration into standard wiring schemes and distribution assemblies.
The product complies with IEC/EN 61009, the standard governing differential circuit breakers. This confirms that the device is intended for applications where overload protection and residual current protection must be combined in one appliance. As a result, it is suitable for use in distribution panels serving lighting groups, socket outlets, and other single-phase loads where circuit protection and leakage-current detection are required together.
Категорія
Диференційний автоматичний вимикач
Номінальний струм (A)
10A
Тип
AC
Номінальний струм витоку (A)
0.03A
Характеристика спрацювання
C
Кількість полюсів
1+N
Вимикаюча здатність (кА)
10kA
Номінальна частота (Hz)
50Hz/60Hz
Номінальний перетин
1mm²-25mm²
Стандарт
IEC/EN 61009
0 reviews
No reviews for this product yet. Be the first!