2163512 Авт. вимикач ETIMAT 6 2p D 6A (6kA)

ETI ETIMAT 6 is a modular circuit breaker designed to protect electrical circuits against overloads and short circuits in distribution boards used in residential, commercial, and industrial installations. It is intended for low-voltage AC networks where automatic disconnection of a line is required under fault conditions. The two-pole design allows simultaneous switching of two conductors, which is relevant for circuits supplied from alternating-current systems. This model is rated at 6 A and uses a D tripping characteristic. Such a curve is suitable for circuits with higher inrush currents, where brief current surges may occur during the start-up of connected equipment. The 6 kA breaking capacity indicates the ability to interrupt short-circuit currents within the specified limits, making the device appropriate for standard protective tasks in low-voltage panels. The breaker is rated for 400 V AC, with a nominal frequency of 50/60 Hz, and its rated impulse withstand voltage Uimp is 6 kV. The unit complies with IEC/EN 60898-1 and IEC 60947-2, confirming its use as a protective device for low-voltage electrical systems. The connection range for conductors from 1 mm² to 25 mm² provides flexibility during installation and allows the installer to select suitable wiring according to the circuit design and panel configuration. This is especially useful when integrating the breaker into existing modular assemblies or when building new distribution groups. ETIMAT 6 is installed in electrical switchboards as an individual protective device for specific loads or circuit sections. Its modular form factor makes it suitable for mounting alongside other DIN-rail equipment in standard distribution enclosures. With its 2-pole configuration, 6 A nominal current, D characteristic, and 6 kA breaking capacity, the breaker is aimed at protecting AC circuits that require coordinated response to overload and short-circuit events while operating within the stated electrical parameters.