ETI ETIMAT 6 miniature circuit breaker 1P 1.6A D 6kA (2161507)

ETI ETIMAT 6 is a miniature circuit breaker designed for protecting electrical circuits against overload and short circuit. It is used in distribution boards of residential, administrative, and small commercial facilities where local line protection is required. With one pole, this device is intended for single-phase circuits or for protecting an individual branch of a power supply line. The breaker has a rated current of 1.6 A, so it is suitable for circuits with low load where conductor and connected equipment protection is especially important. The D tripping characteristic indicates a higher tolerance to short-term inrush currents compared with B or C curves, making the device suitable for circuits with equipment that produces significant starting current. The breaking capacity of 6 kA allows the breaker to disconnect fault currents within the range expected in most standard low-voltage networks. This model is designed for AC circuits with a rated voltage of 230/400 V and a frequency of 50/60 Hz. The rated impulse withstand voltage Uimp of 6 kV reflects resistance to switching and transient overvoltages, which is relevant in installations exposed to electrical disturbances. The permissible conductor cross-section is 1–25 mm², allowing compatibility with commonly used wiring sizes in distribution assemblies. The product complies with IEC/EN 60898-1 and IEC 60947-2 standards, which define requirements for modular circuit breakers and their application in electrical installations. This makes the device suitable for installation in standard electrical panels as part of a modular protection system. ETIMAT 6 can be used as a local protective element for individual loads or separate lines where accurate disconnection, compact installation, and defined technical characteristics are required.