2145510 Авт. вимикач ETIMAT 6 3p C 4A (6kA)
This automatic circuit breaker from ETI, series ETIMAT 6, is designed to protect electrical circuits against overloads and short circuits in residenti...
Категорія
Автоматичний вимикач
Номінальний струм (A)
1A
Характеристика спрацювання
D
Кількість полюсів
3
Вимикаюча здатність (кА)
10kA
Тип напруги
AC
Номінальна імпульсна напруга Uimp (kV)
6kV
Номінальна напруга AC (В)
400V
Code: 2155704
Автоматичний вимикач серії ETIMAT 10 призначений для захисту електричних ліній від перевантаження та короткого замикання. Має 3 полюси, номінальний струм 1A, характеристику D та вимикаючу здатність 10kA.
1,368.81 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
This ETI ETIMAT 10 circuit breaker is designed to protect electrical lines against overload and short-circuit conditions in AC networks. With a three-pole design, it is suitable for circuits where simultaneous disconnection of three phases is required, including group and power circuits in distribution systems. The rated current of 1 A indicates use in low-load applications, while the D tripping characteristic is intended for circuits with higher inrush currents, such as loads with electric motors, transformers, and other devices with brief transient surges.
The breaking capacity of 10 kA provides protection at high short-circuit current levels, helping the device disconnect the circuit safely under fault conditions. The breaker is rated for 400 V AC operation and a frequency of 50/60 Hz, which makes it compatible with standard low-voltage electrical installations. In addition, the rated impulse withstand voltage Uimp of 6 kV supports use in systems where electrical disturbances and surge stresses may occur.
For installation, the device is intended for mounting in modular distribution panels on a DIN rail, which is the standard solution for residential, commercial, and light industrial switchboards. The conductor connection range of 1 to 25 mm² allows integration with a wide variety of cable sizes, simplifying selection for different wiring schemes. Compliance with IEC/EN 60898-1 and IEC 60947-2 confirms that the device meets the requirements applicable to modular circuit breakers and switching equipment.
ETIMAT 10 is a practical choice for protecting circuits that require compact modular installation, defined tripping behavior, and a high breaking capacity. Its combination of a 3-pole configuration, 1 A rated current, D curve, and 10 kA interrupting rating makes it suitable for technical installations where stable circuit protection and reliable phase disconnection are needed.
Категорія
Автоматичний вимикач
Номінальний струм (A)
1A
Характеристика спрацювання
D
Кількість полюсів
3
Вимикаюча здатність (кА)
10kA
Тип напруги
AC
Номінальна імпульсна напруга Uimp (kV)
6kV
Номінальна напруга AC (В)
400V
Номінальна частота (Hz)
50Hz/60Hz
Номінальний перетин
1mm²-25mm²
Стандарт
IEC/EN 60898-1,IEC 60947-2
Призначення
Автоматичний вимикач
0 reviews
No reviews for this product yet. Be the first!