ETI ETIMAT 10 miniature circuit breaker 2P 10A D 10kA (2153714)

ETIMAT 10 by ETI is a miniature circuit breaker intended for protecting electrical circuits against overloads and short circuits. It is used in distribution boards of residential, commercial, and industrial installations where line disconnection is required under fault conditions and where loads with increased inrush current may be connected. This device has 2 poles, allowing simultaneous switching of two conductors in the circuit. The rated current is 10 A, which makes it suitable for protecting individual consumer groups with relatively low operating load. Tripping characteristic D indicates that the breaker is designed for circuits with pronounced inrush currents, such as equipment that draws a higher current for a short time during start-up. The breaking capacity of 10 kA provides the ability to interrupt the circuit during a high short-circuit current. The breaker is designed for AC networks with a rated voltage of 400 V and a frequency of 50/60 Hz. The rated impulse withstand voltage Uimp is 6 kV, which is an important indicator of resistance to transient overvoltages in the electrical network. The permitted conductor cross-section range of 1–25 mm² gives flexibility for different wiring configurations and allows use with both smaller and larger conductors within the specified limits. The product complies with IEC/EN 60898-1 and IEC 60947-2, confirming its suitability for use in both everyday electrical installations and more demanding technical applications. With its two-pole design, D curve, and 10 kA breaking capacity, this miniature circuit breaker is a practical solution for circuit protection in a wide range of electrical systems.