2153708 Авт. вимикач ETIMAT 10 2p D 2А (10 kA)

ETIMAT 10 by ETI is a circuit breaker designed to protect electrical circuits against overloads and short circuits. It is used in distribution boards of residential, commercial, and industrial facilities where controlled disconnection of a line is required under fault conditions. The two-pole design allows simultaneous switching of two conductors, which is suitable for applications where this type of connection is needed in single-phase or other network configurations. This model is rated for a nominal current of 2 A, so it is intended for circuits with low load. The D tripping characteristic indicates suitability for circuits with higher inrush currents, helping prevent unwanted tripping during short-term current peaks. This is especially relevant for electrical lines where brief start-up currents may occur and the protective device must remain stable during normal switching processes. The breaking capacity of 10 kA enables the device to interrupt high short-circuit currents, making it appropriate for networks with elevated fault-current levels. The breaker operates in AC circuits and is rated for 400 V AC with a frequency of 50/60 Hz. These electrical parameters define its use in standard low-voltage distribution systems. The rated impulse withstand voltage Uimp is 6 kV, which reflects resistance to transient overvoltages in the network and is an important indicator for operation in environments with possible switching surges. Connection is possible with conductors of cross-section from 1 to 25 mm², which provides flexibility during installation in modular switchgear. The device complies with IEC/EN 60898-1 and IEC 60947-2, confirming conformity with the requirements for modular circuit breakers used in electrical protection systems. Due to its technical characteristics, ETIMAT 10 can be used as a protective element for individual lines in switchboards where precise tripping, adequate breaking performance, and compatibility with common electrical network schemes are required.