ETI ETIMAT 10 modular circuit breaker 40A 1P curve D 10kA

ETI ETIMAT 10 modular circuit breaker 40A 1P curve D 10kA
ETI ETIMAT 10 modular circuit breaker 40A 1P curve D 10kA
Characteristics

Категорія

Автоматичний вимикач

Номінальний струм (A)

40A

Характеристика спрацювання

D

Кількість полюсів

1

Вимикаюча здатність (кА)

10kA

Тип напруги

AC

Номінальна імпульсна напруга Uimp (kV)

6kV

Номінальна напруга AC (В)

230V/400V

ETI

Code: 2151720

ETI ETIMAT 10 modular circuit breaker 40A 1P curve D 10kA

ETIMAT 10 circuit breaker is designed to protect electrical circuits from overload and short circuit. It has 1 pole, a rated current of 40A, D tripping characteristic, and a breaking capacity of 10kA.

per pcs.

395.37 ₴

On Order

Quick order
Delivery

Delivery across Ukraine within 5 days from the purchase date.

Payment

Pay for orders via Liqpay and plata by mono services.

Guarantee

100% certified products. Service and support.

About product

The ETI ETIMAT 10 modular circuit breaker is intended for protection of electrical circuits against overload and short circuit in distribution boards for residential, commercial, and small industrial installations. It is used where one AC line must be switched and protected separately, making it suitable for single-phase circuits and for individual phase protection in multi-line assemblies. The single-pole design supports compact installation on a DIN rail together with other modular devices.

This model is rated at 40 A, which makes it appropriate for circuits with higher load demand. The D tripping characteristic is intended for networks with significant inrush currents, such as circuits supplying motors, transformers, or other inductive loads. In such applications, the breaker helps avoid unwanted tripping during short-term startup peaks while still providing protection in fault conditions.

The breaking capacity of 10 kA indicates the device can interrupt high short-circuit currents, which is an important parameter for circuit safety and equipment protection. The breaker is designed for AC systems with a rated voltage of 230/400 V and a frequency of 50/60 Hz. Its rated impulse withstand voltage Uimp is 6 kV, reflecting suitability for operation under switching overvoltage conditions commonly present in electrical installations.

For wiring, the device accepts conductors in the 1 to 25 mm² range, allowing connection with commonly used power and distribution conductors. Compliance with IEC/EN 60898-1 and IEC 60947-2 confirms that the product meets the requirements applicable to automatic circuit breakers used in electrical systems. ETIMAT 10 is therefore a practical solution for protecting individual circuits where a one-pole breaker with D characteristic and 10 kA breaking capacity is required.

Головна

Категорія

Автоматичний вимикач

Номінальний струм (A)

40A

Характеристика спрацювання

D

Кількість полюсів

1

Вимикаюча здатність (кА)

10kA

Тип напруги

AC

Номінальна імпульсна напруга Uimp (kV)

6kV

Номінальна напруга AC (В)

230V/400V

Номінальна частота (Hz)

50Hz/60Hz

Номінальний перетин

1mm²-25mm²

Стандарт

IEC/EN 60898-1,IEC 60947-2

Призначення

Автоматичний вимикач

-

0 reviews

No reviews for this product yet. Be the first!

Recently Viewed