2151712 Авт. вимикач ETIMAT 10 1p D 6А (10 kA)

The ETI ETIMAT 10 circuit breaker is designed to protect electrical circuits against overloads and short circuits. It is used in distribution boards for residential, commercial, and industrial installations where individual line disconnection is required under fault conditions. With one pole, the device is intended for single-phase circuits or for protecting a separate phase conductor within a distribution system. This model is rated for a nominal current of 6 A and features a D tripping characteristic. Such a trip curve makes it suitable for circuits with higher inrush currents, including loads that may draw short-term current peaks during start-up. The breaking capacity of 10 kA allows the breaker to interrupt fault currents effectively in networks with elevated short-circuit levels, which is an important parameter for low-voltage protection systems. The breaker is designed for AC circuits. Its rated operating voltage is 230/400 V AC, and the rated frequency is 50/60 Hz, matching common power supply conditions. The rated impulse withstand voltage Uimp of 6 kV indicates the device’s ability to withstand short-duration overvoltage events that can occur in electrical installations. The permissible conductor cross-section range of 1 to 25 mm² provides flexibility during wiring and makes the device suitable for different cable and wire sizes depending on the installation scheme. The product complies with IEC/EN 60898-1 and IEC 60947-2 standards, confirming its suitability for use in low-voltage distribution networks. ETIMAT 10 combines a compact modular format with one-pole protection, 6 A rated current, D characteristic, and 10 kA breaking capacity, making it a practical solution for controlled circuit protection in a wide range of electrical applications.