2151708 Авт. вимикач ETIMAT 10 1p D 2А (10 kA)

The ETI ETIMAT 10 automatic circuit breaker is designed to protect electrical circuits against overloads and short circuits. It is used in distribution boards of residential, commercial, and industrial electrical installations, where a separate line must be disconnected in the event of an emergency operating mode. With a 1-pole design, this device is intended for the protection of single-phase circuits, while the 2 A rated current makes it suitable for lines with low power consumption or control circuits. The D tripping characteristic means the breaker can tolerate short-term inrush currents higher than those allowed by B or C characteristic devices. This is particularly relevant for circuits that may experience significant starting currents. The 10 kA breaking capacity ensures circuit interruption under high short-circuit currents, which makes the device suitable for networks with elevated protection requirements. It operates in AC circuits, with a rated voltage of 230/400 V and a frequency of 50/60 Hz. The rated impulse withstand voltage Uimp of 6 kV indicates resistance to short-duration overvoltage surges, which is important in electrical systems exposed to switching impulses. The device is designed for connection of conductors with a nominal cross-section from 1 to 25 mm², which simplifies integration into different wiring configurations. The breaker complies with IEC/EN 60898-1 and IEC 60947-2 standards, which define the parameters and safety requirements for modular protective equipment. ETIMAT 10 is suitable for installation in modular switchboards as a local protection element for individual lines. Its technical characteristics make it a practical solution for circuit protection where precise current rating, high breaking capacity, and compliance with international standards are required.