2146516 Авт. вимикач ETIMAT 6 3p+N C 16А (6 kA)

This ETI ETIMAT 6 circuit breaker is designed to protect AC electrical circuits against overloads and short circuits in distribution boards used in residential, commercial, and light industrial installations. It is intended for branch circuit protection where loads may produce moderate inrush currents, such as lighting groups, socket circuits, and connected equipment with brief start-up peaks. The device has a 3P+N configuration, meaning three protected phase poles plus a neutral pole. Its rated current is 16 A, which makes it suitable for circuits with moderate power demand. The C tripping characteristic provides a balanced response to both overload and short-circuit conditions and is commonly used where temporary current surges occur during switching on electrical equipment. With a breaking capacity of 6 kA, the breaker can interrupt fault currents within the range typically required in most household and commercial networks. ETIMAT 6 is rated for 400 V AC and a frequency of 50/60 Hz. The rated impulse withstand voltage Uimp is 6 kV, which indicates resistance to short-duration overvoltage events in the network. Another practical feature is the permissible conductor cross-section range of 1–25 mm², allowing flexible selection of wiring during installation and connection to the circuit according to the design requirements. The product complies with IEC/EN 60898-1 and IEC 60947-2, confirming its use in electrical distribution and line protection applications. These standards are relevant for low-voltage circuit protection devices used in modern switchboards. Thanks to the combination of 3P+N pole arrangement, 16 A rating, C curve, and 6 kA breaking capacity, this circuit breaker is a suitable option for protecting three-phase circuits with neutral in installations where reliable disconnection under overload and fault conditions is required.