2146515 Авт. вимикач ETIMAT 6 3p+N C 13А (6 kA)

The ETIMAT 6 series automatic circuit breaker by ETI is designed to protect electrical circuits against overloads and short circuits. With a 3P+N configuration, it is intended for three-phase networks with a neutral conductor, providing simultaneous switching of three phase conductors and the neutral line. This format is suitable for distribution boards in residential, commercial, and small industrial installations where three-phase loads are used. The rated current of 13 A makes this device appropriate for circuits with relatively low power demand. The C tripping characteristic means the breaker can be used in circuits with moderate inrush currents, including loads that may contain electric motors or other equipment with a brief current surge during startup. The breaking capacity of 6 kA enables disconnection under short-circuit conditions typical of standard low-voltage networks, supporting effective protection of the electrical line and connected equipment. The breaker is designed for AC circuits with a rated voltage of 400 V and a frequency of 50/60 Hz. The rated impulse withstand voltage Uimp of 6 kV indicates resistance to short-duration overvoltage events, which is important in installations where switching or lightning-induced surges may occur. The conductor connection range of 1–25 mm² allows compatibility with a wide selection of cable and wire cross-sections within the permitted limits, simplifying integration into distribution systems. This device complies with IEC/EN 60898-1 and IEC 60947-2 standards, confirming its suitability for power distribution applications and final circuit protection. As a modular protective device, it is used in switchboards where dependable circuit isolation, correct load disconnection, and conformity with common electrical installation requirements are important. The ETIMAT 6 3P+N C 13 A breaker is a practical solution for protecting three-phase lines in networks that require neutral switching, standard AC operation, and defined protection parameters.