2145515 Авт. вимикач ETIMAT 6 3p C 13А (6 kA)

The ETIMAT 6 modular circuit breaker by ETI is designed to protect electrical circuits against overloads and short circuits. With three poles, it is used in three-phase systems where three conductors must be switched simultaneously. This configuration makes the device suitable for protecting distribution lines and grouped loads in low-voltage installations. The rated current of 13 A indicates use on circuits with relatively low to moderate load, while the C tripping characteristic supports operation in circuits with higher inrush currents, such as equipment that draws a brief current peak during start-up. The breaker is intended for AC networks with a rated voltage of 400 V and a frequency of 50/60 Hz. Its breaking capacity of 6 kA allows interruption of short-circuit currents typical of residential and part of commercial electrical networks. The rated impulse withstand voltage Uimp of 6 kV adds resistance to transient overvoltages, which is important for installation in distribution boards and other low-voltage switching assemblies. This model complies with IEC/EN 60898-1 and IEC 60947-2 standards, confirming its suitability as a protective device in low-voltage electrical installations. The permissible conductor cross-section range from 1 mm² to 25 mm² provides flexibility during wiring and simplifies integration into different panel configurations. The modular design is intended for installation on a DIN rail, which is standard for modern distribution boards and allows the breaker to be mounted together with other modular devices. ETIMAT 6 can be used in residential buildings, office spaces, small commercial facilities, and selected industrial applications where the network parameters match the device ratings. The combination of 3 poles, 13 A nominal current, C curve, and 6 kA breaking capacity defines a circuit breaker focused on reliable line protection in three-phase circuits. It serves as a functional element for organizing the protection and switching of individual feeders or load groups in electrical distribution systems.