ETI ETIMAT 6 circuit breaker 3P 6A C 6kA (2145512)

ETI ETIMAT 6 is a modular circuit breaker designed to protect electrical circuits against overload and short circuit in AC distribution systems. It is suitable for use in single-phase and three-phase networks where all phases must be disconnected simultaneously, which makes it practical for distribution boards serving separate power lines or groups of consumers. The device has 3 poles and a rated current of 6 A, so it is intended for low-power circuits. The C tripping characteristic allows it to operate correctly in circuits with moderate inrush currents, for example where connected loads may create short-term current peaks during startup. With a breaking capacity of 6 kA, the breaker is able to interrupt fault currents typical for residential and light commercial installations. ETIMAT 6 is rated for 400 V AC and operates at a frequency of 50/60 Hz. The rated impulse withstand voltage Uimp is 6 kV, which indicates resistance to short-duration overvoltage events in the electrical network. These parameters make the device suitable for standard low-voltage distribution applications where stable protective performance is required. Connection is possible with conductors in the 1–25 mm² range, which provides flexibility during panel assembly and wiring of circuits with different conductor cross-sections, provided the installation stays within the specified limits. The breaker complies with IEC/EN 60898-1 and IEC 60947-2, confirming conformity with the standards used for circuit-breaking and protective switching devices. This model is used in residential, office, service, and small commercial installations as a basic protective element for branch circuits. It helps isolate a fault within a specific line and prevents the need to disconnect the entire electrical system.