Automatic circuit breaker ETI ETIMAT 6 3P 1.6A C 6kA (2145507)

ETIMAT 6 від ETI is a three-pole automatic circuit breaker designed to protect electrical circuits against overload and short circuit. It is used in distribution boards of residential, commercial, and small industrial installations where disconnection of three-phase lines or other three-pole circuits is required. With a rated current of 1.6 A, this device is intended for low-power loads and for circuits that do not require a higher current setting. The C tripping characteristic makes the breaker suitable for circuits with moderate inrush currents, which is important for equipment that may draw a temporary current increase during start-up. The breaking capacity of 6 kA defines the maximum short-circuit current the device can safely interrupt, making it appropriate for typical low-voltage distribution networks. The breaker operates in AC systems with a rated voltage of 400 V and a frequency of 50/60 Hz, which confirms its use in standard power supply installations. A further technical parameter is the rated impulse withstand voltage Uimp of 6 kV. This value characterizes resistance to transient overvoltages that may appear in the network and helps maintain the protective function of the device under electrical stress. The breaker supports conductor cross-sections from 1 to 25 mm², which provides flexibility when connecting different types of wiring in switchboard assemblies. The product complies with IEC/EN 60898-1 and IEC 60947-2 standards. This indicates conformity with requirements for low-voltage circuit breakers used in both residential and more demanding distribution applications. As a modular device, ETIMAT 6 is intended for installation on a DIN rail inside a distribution panel, where it can be combined with other modular protective and switching equipment. Overall, this 3-pole breaker is a compact protective element for circuits that need precise current limitation and reliable interruption of fault currents. Its combination of 1.6 A rated current, C curve, 6 kA breaking capacity, AC operation, and standardized modular mounting makes it suitable for organizing protection in three-phase networks and other three-pole lines.