ETI ETIMAT 6 2-pole 32A C 6kA circuit breaker (2143519)

ETI ETIMAT 6 is a two-pole automatic circuit breaker designed for protecting electrical circuits against overloads and short circuits in AC networks. It is suitable for single-phase and two-phase applications where simultaneous disconnection of both lines is required, which is important for safe operation of distribution circuits in residential, commercial, and light industrial installations. The device has a rated current of 32 A, making it appropriate for branch circuits with moderate load. Its C tripping characteristic is intended for circuits with short-term inrush currents, such as loads with electric motors or other equipment that draws a brief startup current. With a breaking capacity of 6 kA, the breaker can interrupt fault currents in typical low-voltage power systems used in everyday electrical installations. The breaker is rated for 400 V AC and a frequency of 50/60 Hz, so it matches common conditions in switchboard assemblies and modular distribution systems. The rated impulse withstand voltage Uimp of 6 kV indicates resistance to short-duration overvoltage events that may occur during switching operations or due to external disturbances in the network. ETIMAT 6 complies with IEC/EN 60898-1 and IEC 60947-2, confirming its suitability for line protection tasks according to recognized international standards. The connection range of 1–25 mm² allows convenient termination of different conductor sizes, which is useful when assembling or upgrading distribution boards. The product is designed for modular installation on a DIN rail, making it easy to integrate with other modular devices in the same enclosure. This breaker is used for protection of lighting circuits, socket circuits, and other consumers that require two-pole disconnection, AC operation, and C-curve tripping. In switchboards, it serves as a circuit protection element that helps isolate faulty lines and maintain organized distribution of electrical loads.