2143518 Авт. вимикач ETIMAT 6 2p C 25А (6 kA)

The ETI ETIMAT 6 miniature circuit breaker is designed to protect electrical circuits against overloads and short circuits in single-phase and two-wire lines. With two poles, it is suitable for applications where two conductors must be switched simultaneously, making it appropriate for use in distribution boards of residential, commercial, and small industrial installations. The 25 A rated current allows this device to be used in circuits with moderate loads, while tripping characteristic C makes it suitable for lines with moderate inrush currents, such as those supplying appliances that include electric motors. A breaking capacity of 6 kA means the breaker can safely disconnect the circuit under significant short-circuit currents, which is an important requirement for protecting both the network and connected equipment. The device is intended for AC systems with a rated voltage of 400 V and a frequency of 50/60 Hz. The rated impulse withstand voltage Uimp of 6 kV further indicates resistance to short-duration overvoltage events in the electrical network. The breaker supports conductors with a nominal cross-section from 1 to 25 mm², which simplifies integration into different wiring schemes and distribution panels. It complies with IEC/EN 60898-1 and IEC 60947-2 standards, which define the requirements and operating characteristics of modular protective devices. Thanks to its 2-pole design, 25 A rating, C curve, and 6 kA breaking capacity, this circuit breaker is a practical solution for circuit protection and switching in electrical distribution equipment.