ETI ETIMAT 6 1P 2A C 6kA circuit breaker (2141508)

The ETI ETIMAT 6 circuit breaker is intended for protection of electrical circuits against overloads and short circuits in distribution boards used in residential, commercial, and industrial installations. With one pole, this device is suitable for protecting single-phase circuits and individual lines where precise current limitation is required. The rated current of 2 A makes it appropriate for low-power loads or dedicated control circuits with a small operating current. The C tripping characteristic indicates that the device is designed for circuits with moderate inrush currents. This is important where connected equipment may draw a brief starting current at switch-on, while still requiring dependable protection against fault conditions. The breaking capacity of 6 kA defines the breaker’s ability to interrupt short-circuit currents within systems where the prospective fault current remains at this level, which is a standard requirement for many common electrical networks. This model operates in AC circuits with a rated voltage of 230/400 V and a frequency of 50/60 Hz, making it compatible with widely used supply systems. The rated impulse withstand voltage Uimp of 6 kV reflects resistance to short-duration voltage surges that may occur in the electrical installation. These parameters are important when selecting modular protection devices for switchboards and control panels. The breaker accepts conductors with a cross-section from 1 to 25 mm², which supports convenient wiring within the specified installation range. It complies with IEC/EN 60898-1 and IEC 60947-2 standards, confirming its conformity with requirements for modular circuit protection and switching apparatus. ETIMAT 6 can be used as part of a standardized distribution system where the main task is to disconnect a circuit automatically under overload or short-circuit conditions while maintaining clear technical ratings for installation and operation.