2136712 Авт. вимикач ETIMAT 10 3p+N C 6А (10 kA)
The ETI ETIMAT 10 circuit breaker is designed for protecting electrical circuits against overloads and short circuits in distribution boards of reside...
Категорія
Автоматичний вимикач
Номінальний струм (A)
6A
Характеристика спрацювання
C
Кількість полюсів
3+N
Вимикаюча здатність (кА)
10kA
Тип напруги
AC
Номінальна імпульсна напруга Uimp (kV)
6kV
Номінальна напруга AC (В)
400V
Code: 2136712
Автоматичний вимикач серії ETIMAT 10 призначений для захисту електричних кіл від перевантаження та короткого замикання. Має виконання 3P+N, номінальний струм 6A, характеристику C і вимикаючу здатність 10kA.
907.05 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
The ETI ETIMAT 10 circuit breaker is designed for protecting electrical circuits against overloads and short circuits in distribution boards of residential, commercial, and small industrial facilities. The 3P+N configuration makes it suitable for three-phase networks with a neutral conductor, where simultaneous disconnection of three phases and the neutral is required. This arrangement is typically used for group feeders, power consumers, and circuits that need proper isolation during maintenance or fault conditions.
With a rated current of 6 A, the device is intended for circuits with relatively low load. The C tripping characteristic means the breaker is suited for circuits with moderate inrush currents, which is important when connecting equipment that may briefly draw higher current during startup. The breaking capacity of 10 kA allows the breaker to interrupt fault currents safely in networks where short-circuit levels can be significant.
The device is designed for AC circuits with a rated voltage of 400 V and a frequency of 50/60 Hz. The rated impulse withstand voltage Uimp of 6 kV indicates resistance to short-duration overvoltage events caused by switching operations or external disturbances. These parameters make the breaker applicable in installations where stable operation under standard network conditions is required.
The model complies with IEC/EN 60898-1 and IEC 60947-2 standards, confirming its suitability for use in electrical distribution systems in line with requirements for modular protective equipment. The supported conductor cross-section range of 1 mm² to 25 mm² provides flexibility for connection in different installation scenarios without exceeding the specified terminal limits. ETIMAT 10 is a practical solution for protecting three-phase circuits where the 3P+N layout, 6 A rating, C curve, and 10 kA breaking capacity are key selection criteria.
Категорія
Автоматичний вимикач
Номінальний струм (A)
6A
Характеристика спрацювання
C
Кількість полюсів
3+N
Вимикаюча здатність (кА)
10kA
Тип напруги
AC
Номінальна імпульсна напруга Uimp (kV)
6kV
Номінальна напруга AC (В)
400V
Номінальна частота (Hz)
50Hz/60Hz
Номінальний перетин
1mm²-25mm²
Стандарт
IEC/EN 60898-1,IEC 60947-2
Призначення
Автоматичний вимикач
0 reviews
No reviews for this product yet. Be the first!