ETI ETIMAT 10 miniature circuit breaker 3-pole 40A C 10kA

ETI ETIMAT 10 miniature circuit breaker 3-pole 40A C 10kA
ETI ETIMAT 10 miniature circuit breaker 3-pole 40A C 10kA
Characteristics

Категорія

Автоматичний вимикач

Номінальний струм (A)

40A

Характеристика спрацювання

C

Кількість полюсів

3

Вимикаюча здатність (кА)

10kA

Тип напруги

AC

Номінальна імпульсна напруга Uimp (kV)

6kV

Номінальна напруга AC (В)

400V

ETI

Code: 2135720

ETI ETIMAT 10 miniature circuit breaker 3-pole 40A C 10kA

ETIMAT 10 circuit breaker is designed to protect electrical circuits against overloads and short circuits. It features 3 poles, rated current 40A, C tripping characteristic, and breaking capacity 10kA.

per pcs.

981.93 ₴

On Order

Quick order
Delivery

Delivery across Ukraine within 5 days from the purchase date.

Payment

Pay for orders via Liqpay and plata by mono services.

Guarantee

100% certified products. Service and support.

About product

This automatic circuit breaker from ETI’s ETIMAT 10 series is intended for protecting three-phase electrical circuits against overloads and short circuits. It is used in distribution boards of residential, commercial, and industrial facilities where reliable disconnection of a line during an emergency condition is required. With three poles, the device is suitable for switching and protecting AC circuits in low-voltage electrical systems.The rated current is 40 A, which makes this breaker appropriate for circuits with a corresponding operating load. The C tripping characteristic means it is designed for lines with moderate inrush currents, such as circuits feeding equipment that may draw a short-term current surge during startup. This makes it suitable for a wide range of general-purpose power applications where temporary current peaks can occur.The breaking capacity of 10 kA provides the ability to interrupt high short-circuit currents, which is an important parameter for electrical safety in networks where fault currents may be significant. The breaker is rated for 400 V AC and operates at 50/60 Hz, so it can be integrated into standard three-phase AC supply systems. The nominal impulse withstand voltage Uimp of 6 kV indicates resistance to transient overvoltages in the installation.The conductor connection range of 1–25 mm² allows the use of cables and wires with different cross-sections, provided that installation requirements are observed. Compliance with IEC/EN 60898-1 and IEC 60947-2 confirms that the device is intended for use in modular low-voltage switchboards and meets recognized requirements for protective switching equipment.ETIMAT 10 combines standard modular installation principles with electrical parameters suited for circuit protection where current rating, trip curve, and breaking capacity must match the network conditions. It is a practical solution for line protection in systems that require three-pole disconnection and stable operation under AC supply conditions.

Головна

Категорія

Автоматичний вимикач

Номінальний струм (A)

40A

Характеристика спрацювання

C

Кількість полюсів

3

Вимикаюча здатність (кА)

10kA

Тип напруги

AC

Номінальна імпульсна напруга Uimp (kV)

6kV

Номінальна напруга AC (В)

400V

Номінальна частота (Hz)

50Hz/60Hz

Номінальний перетин

1mm²-25mm²

Стандарт

IEC/EN 60898-1,IEC 60947-2

Призначення

Автоматичний вимикач

-

0 reviews

No reviews for this product yet. Be the first!

Recently Viewed