Circuit breaker ETI ETIMAT 10 3P 1,6A C 10kA (2135707)

ETIMAT 10 from ETI is a circuit breaker designed to protect AC electrical circuits against overloads and short circuits. It is suitable for distribution boards in residential, commercial, and industrial installations where three-phase lines or other three-pole circuits need simultaneous switching and protection. The three-pole design ensures coordinated disconnection of all phases, which is important for maintaining safe operation of the electrical network. The device is rated at 1.6 A and uses a C tripping characteristic. This makes it appropriate for circuits with moderate inrush currents, such as loads that may briefly draw more current during start-up. The breaker operates in 400 V AC networks at a frequency of 50/60 Hz, so it is compatible with standard alternating-current systems. Its 10 kA breaking capacity allows it to interrupt high short-circuit currents, which is especially important in installations with elevated fault levels. For additional electrical endurance, the breaker has a rated impulse withstand voltage Uimp of 6 kV. Conductors with cross-sections from 1 mm² to 25 mm² can be connected, which supports flexible use in different wiring schemes and simplifies installation in distribution equipment. The product complies with IEC/EN 60898-1 and IEC 60947-2 standards, which define key requirements for circuit breakers and their application. As a modular protective device, ETIMAT 10 is intended for mounting in an electrical panel and serves as a local line protection element in AC networks where high interrupting capacity and reliable circuit control are required.