2135704 Авт. вимикач ETIMAT 10 3p C 1А (10 kA)

This circuit breaker from ETI, series ETIMAT 10, is designed to protect AC electrical circuits against overloads and short circuits. With three poles, it is suitable for three-phase lines where simultaneous switching and disconnection of all phases is required. The rated current of 1 A makes it appropriate for circuits with low load, while the C tripping characteristic provides operation in circuits with moderate inrush currents, such as lines supplying equipment with brief starting peaks. The breaking capacity of 10 kA indicates that the device can interrupt fault currents of significant magnitude, which is important in low-voltage installations with elevated protection requirements. The breaker is rated for 400 V AC and operates at 50/60 Hz, so it can be used in standard electrical distribution systems. The rated impulse withstand voltage Uimp of 6 kV adds information about resistance to short-duration overvoltages in the network. The model complies with IEC/EN 60898-1 and IEC 60947-2, confirming its suitability for use in distribution boards and other switchgear assemblies. The conductor cross-section range of 1 to 25 mm² should be taken into account during wiring and installation, as it defines the permitted connection range for conductors and cables. This is a practical solution for residential, commercial, and industrial applications where compact modular protection of three-phase circuits with low rated current is required.