Double-pole switch Schneider Electric 16A, 2 modules, anthracite (NU326254)
Двополюсний вимикач 16А 2 модуль антрацит
Категорія
Автоматичний вимикач
Номінальний струм (A)
0.5A
Характеристика спрацювання
C
Кількість полюсів
3
Вимикаюча здатність (кА)
10kA
Тип напруги
AC
Номінальна імпульсна напруга Uimp (kV)
6kV
Номінальна напруга AC (В)
400V
Code: 2135701
Автоматичний вимикач серії ETIMAT 10 призначений для захисту електричних ліній від перевантаження та короткого замикання. Має 3 полюси, номінальний струм 0,5A, характеристику C та вимикаючу здатність 10kA.
1,073.28 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
This circuit breaker from the ETIMAT 10 series by ETI is designed to protect electrical circuits against overloads and short circuits. It is used in distribution boards of residential, commercial, and small industrial facilities where dependable disconnection of three-phase lines or grouped loads is required in accordance with the electrical supply parameters.
The device has 3 poles and a rated current of 0.5 A, which makes it suitable for circuits with low operating current where precise limitation of the load and prompt fault isolation are important. The C tripping characteristic supports operation in circuits with moderate inrush currents, so the breaker can be applied to electrical lines with loads that briefly draw increased current during switching on.
The breaking capacity of 10 kA allows the device to interrupt the circuit under significant short-circuit current, which is an important parameter for low-voltage networks. The breaker is intended for AC systems with a rated voltage of 400 V and a rated frequency of 50/60 Hz, making it compatible with common alternating-current installations. The rated impulse withstand voltage Uimp of 6 kV further describes the device’s resistance to short-term overvoltage events in the network.
From a construction and installation perspective, the breaker is intended for mounting in electrical panels together with other modular equipment. The supported conductor cross-section is 1–25 mm², which simplifies selection of the wiring for a specific connection scheme. The product complies with IEC/EN 60898-1 and IEC 60947-2, which define the requirements for low-voltage circuit breakers and confirm the technical framework of its application.
ETIMAT 10 3P 0.5 A C 10 kA is a practical solution for protecting three-pole lines where the required combination of low rated current, C characteristic, 10 kA breaking capacity, and operation in AC networks is essential.
Категорія
Автоматичний вимикач
Номінальний струм (A)
0.5A
Характеристика спрацювання
C
Кількість полюсів
3
Вимикаюча здатність (кА)
10kA
Тип напруги
AC
Номінальна імпульсна напруга Uimp (kV)
6kV
Номінальна напруга AC (В)
400V
Номінальна частота (Hz)
50Hz/60Hz
Номінальний перетин
1mm²-25mm²
Стандарт
IEC/EN 60898-1,IEC 60947-2
Призначення
Автоматичний вимикач
0 reviews
No reviews for this product yet. Be the first!