2133719 Авт. вимикач ETIMAT 10 2p C 32А (10 kA)

The ETI ETIMAT 10 circuit breaker is designed to protect electrical lines against overloads and short circuits in AC networks. With a two-pole design, it can disconnect two conductors simultaneously, which is suitable for single-phase circuits with stricter disconnection requirements or for individual outgoing lines in distribution boards. The rated current of 32 A makes this device appropriate for circuits with medium load, where protection must be maintained without unnecessary tripping. The C tripping characteristic indicates suitability for circuits with moderate inrush currents. This is important for lines supplying household or light industrial equipment with electric motors, transformers, or other loads that create short-term starting current. The breaking capacity of 10 kA allows the device to interrupt fault currents in networks with an elevated short-circuit level, expanding its use in residential, commercial, and technical electrical installations. This model is intended for AC systems with a rated operating voltage of 400 V and a frequency of 50/60 Hz. The rated impulse withstand voltage Uimp is 6 kV, which is relevant for operation under switching overvoltages. Conductor connection is supported in the range of 1 to 25 mm², making the breaker suitable for different cable and wire cross-sections used in distribution circuits. The product complies with IEC/EN 60898-1 and IEC 60947-2 standards, which define requirements for modular circuit breakers. ETIMAT 10 is used in distribution boards to provide protection for individual consumer groups and feeder lines. The combination of two-pole execution, 32 A rating, C curve, and 10 kA breaking capacity makes this device technically suitable for electrical systems that require standardized and reliable disconnection of abnormal operating conditions.