2133716 Авт. вимикач ETIMAT 10 2p C 16А (10 kA)

The ETI ETIMAT 10 circuit breaker is designed for protection of electrical circuits against overload and short circuit in AC networks. With two poles, it is suitable for circuits where both current-carrying conductors need to be disconnected simultaneously. This makes the device appropriate for distribution lines in single-phase and three-phase installations, as well as for feeder protection in distribution boards. The rated current of 16 A makes this breaker a practical choice for lighting groups, socket circuits, and other loads with moderate starting currents. Tripping characteristic C indicates suitability for circuits with brief inrush currents, which is important when connected equipment includes motors or other devices with short-term current peaks during switching on. The breaking capacity of 10 kA provides protection in systems where a higher switching and interruption reserve is required, including residential, commercial, and small industrial installations. The device is intended for operation in AC networks with a rated voltage of 400 V and a frequency of 50/60 Hz. The rated impulse withstand voltage Uimp of 6 kV reflects resistance to short-duration overvoltage events, including switching and atmospheric impulses. Another important technical parameter is the permitted conductor cross-section of 1–25 mm², which supports flexible installation and connection in different wiring schemes. The breaker complies with IEC/EN 60898-1 and IEC 60947-2, confirming its use for power distribution and cable line protection in electrical installations. ETIMAT 10 is a modular device designed for mounting on a DIN rail in a distribution board, where it can be integrated with other modular equipment. Combined with its 2-pole design, 16 A rating, C curve, and 10 kA breaking capacity, this model addresses the needs of standard circuit protection in building electrical systems.