2133714 Авт. вимикач ETIMAT 10 2p C 10А (10 kA)

ETI ETIMAT 10 is a modular circuit breaker designed to protect electrical circuits against overload and short circuit in AC networks. It is used in distribution boards of residential, commercial, and industrial facilities where line protection and switching of individual circuits are required. The two-pole design makes it suitable for applications that need simultaneous disconnection of two conductors, which is especially relevant in single-phase circuits with enhanced switching requirements or in auxiliary supply lines. The device is rated at 10 A and has a C tripping characteristic. This characteristic is intended for circuits with moderate inrush currents, such as lighting circuits, socket groups, and individual consumers that may draw a short-term current surge during startup. The rated breaking capacity of 10 kA allows the breaker to interrupt high fault currents, making it appropriate for installations where the prospective short-circuit current is higher than in basic domestic networks. The breaker operates in AC systems with a rated AC voltage of 400 V and a rated frequency of 50/60 Hz. Another important parameter is the rated impulse withstand voltage Uimp of 6 kV, which indicates resistance to short transient overvoltages in the electrical network. The nominal conductor cross-section range is 1 to 25 mm², so the device can be connected with a wide selection of conductors commonly used in switchboard wiring. This helps adapt the breaker to different installation layouts without changing the protection device. The product complies with IEC/EN 60898-1 and IEC 60947-2 standards, confirming its applicability in standardized low-voltage electrical installations. ETIMAT 10 is therefore a practical choice for protecting power lines where dependable two-pole disconnection, a 10 kA breaking capacity, and correct operation in AC circuits are required.