Automatic circuit breaker ETI ETIMAT 10 2P 6A C 10kA (2133712)

ETI ETIMAT 10 is a two-pole automatic circuit breaker designed to protect electrical circuits against overload and short circuit in distribution boards of residential, commercial, and administrative installations. With a rated current of 6 A, it is suitable for low-power lines, including lighting circuits and auxiliary branches where compact modular protection is required. The C tripping characteristic means the device is intended for circuits with moderate inrush currents. This is relevant for consumer loads that may briefly draw higher current at start-up, such as certain lighting groups or equipment with limited starting surges. The breaking capacity of 10 kA provides a higher level of short-circuit interruption capability, making the breaker appropriate for networks where stronger fault currents may occur. The device is intended for AC systems with a rated operating voltage of 400 V and a frequency of 50/60 Hz. In addition, the rated impulse withstand voltage Uimp of 6 kV indicates resistance to short-term voltage surges that can appear in low-voltage networks. The breaker complies with IEC/EN 60898-1 and IEC 60947-2, which define requirements for low-voltage modular protective equipment and circuit breakers used in electrical installations. The two-pole design allows simultaneous switching and disconnection of two conductors in one circuit, which is useful where coordinated isolation is needed. The permitted conductor cross-section of 1 to 25 mm² supports compatibility with commonly used wiring solutions in panel assemblies. The device is mounted in switchboards as part of modular distribution equipment, where compact size and standardized installation are important. ETIMAT 10 can be used as a local protective element for a single line or as part of a larger power distribution system. Its technical parameters make it suitable for applications where both overload and short-circuit protection, as well as two-pole disconnection, are required.