2133708 Авт. вимикач ETIMAT 10 2p C 2А (10 kA)

The ETIMAT 10 automatic circuit breaker by ETI is designed to protect electrical circuits against overload and short circuit. It is used in distribution boards of residential, commercial, and light industrial installations where reliable disconnection of the line is required in abnormal operating conditions. With two poles, the device provides simultaneous switching of the circuit, which is appropriate for two-wire lines and other configurations that require two-pole isolation. This model is rated for a current of 2 A, so it is intended for low-power loads and circuits with limited current demand. The C tripping characteristic allows the breaker to withstand short-term inrush currents without nuisance tripping while still providing protection against prolonged overload and fault current. The breaking capacity of 10 kA means the device can disconnect circuits under high short-circuit currents, which is important in installations where fault levels may be elevated. The breaker operates in AC circuits with a rated voltage of 400 V and a frequency of 50/60 Hz. The rated impulse withstand voltage, Uimp, is 6 kV, which indicates resistance to short-duration overvoltage events. The permitted conductor cross-section ranges from 1 mm² to 25 mm², allowing the breaker to be integrated into different internal wiring schemes within the specified connection limits. The device complies with IEC/EN 60898-1 and IEC 60947-2 standards, confirming its conformity with requirements for modular protective equipment. In practice, this makes the breaker suitable for installation in switchboards where precise coordination between load characteristics and protection parameters is needed. The combination of two poles, 2 A rated current, C characteristic, and 10 kA breaking capacity provides a defined protective function for circuits that require controlled disconnection and stable operation under standard AC supply conditions.