Circuit breaker ETI ETIMAT 10 2P 0.5A C 10kA (2133701)

The ETI ETIMAT 10 miniature circuit breaker is intended for protection of electrical circuits against overload and short circuit in AC installations. With 2 poles, it allows simultaneous switching of two conductors, which is useful in circuits where coordinated disconnection of the supply line is required. The device is rated at 0.5 A, so it is suitable for low-current circuits where precise current limitation and reliable response to abnormal operating conditions are needed. The C tripping characteristic indicates suitability for circuits with moderate inrush currents. This makes the breaker appropriate for protecting individual branches of electrical systems where short-term current surges may occur during switching on, without indicating a fault. A breaking capacity of 10 kA provides protection in the event of high short-circuit currents and supports use in distribution boards in residential, commercial, and similar installations with corresponding network demands. The breaker is designed for AC systems with a rated operating voltage of 400 V and a frequency of 50/60 Hz. It also has a rated impulse withstand voltage of 6 kV, which reflects resistance to short-duration overvoltage events in the network. The permissible conductor cross-section range of 1 to 25 mm² facilitates integration into various wiring schemes and allows connection of conductors within the specified technical limits of the device. ETIMAT 10 complies with IEC/EN 60898-1 and IEC 60947-2, confirming its suitability for use in modular electrical distribution equipment. In practice, this makes the device a functional solution for basic line protection where defined electrical parameters, standard compatibility, and installation in a distribution board are required.